[ts-7000] adc module problem

["Dale" <>]

Hi all,
  I am using Phil's excellent adc-0.0.2 driver on a TS-7250 with the
ts-11 kernel. It works great when I can get the module to load. Here's
the problem:

Insmod always works *after* I ftp the file to the TS-7250.

If the TS-7250 is rebooted, insmod always crashes with :
insmod: multiply defined
insmod: multiply defined
insmod: multiply defined
.....
followed by a lock-up, requiring reboot.

The adc.o file is compiled from the source in the file section, and
works fine. Insmod works without complaints only if I ftp the file
after a reboot.  Yes, I have used sync to make sure it's not a
cacheing problem.

Anybody got any ideas ?

Dale
TS-7250+MAX197+64M/128M - ts11 kernel
developing w/crosstools on Gentoo 2.6.15








 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/