[ts-7000] -- Linux boot from spi sdcard bypassing FPGA ?

ts-7000

[ts-7000] -- Linux boot from spi sdcard bypassing FPGA ?

from [irares]

To:
Subject:	[ts-7000] -- Linux boot from spi sdcard bypassing FPGA ?
From:	"irares" <>
Date:	Thu, 24 Aug 2006 00:29:40 -0000

 Has anybody tried and succeded booting from an SDCARD connected via 
spi directly to the ARM cpu? (bypass the FPGA SDCARD interface)

Simple architecture - ARM9 + spi SDCARD + eeprom (no onboard flash)

 I'm experimenting this using a modified TS-7260 board for now

 








 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] -- Linux boot from spi sdcard bypassing FPGA ?, irares <=

Previous by Date:	[ts-7000] -- TS7260 Boot from SDCARD by bypassing FPGA SDCARD interface, irares
Next by Date:	[ts-7000] Re: COM2 Pinouts, asc135
Previous by Thread:	[ts-7000] -- TS7260 Boot from SDCARD by bypassing FPGA SDCARD interface, irares
Next by Thread:	[ts-7000] industrial touch screen panel for the ts-7300, Dave Cramer
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU