| To: | |
|---|---|
| Subject: | [ts-7000] Re: rs232 vs rs485 |
| From: | "mathlaj" <> |
| Date: | Wed, 23 Aug 2006 17:54:33 -0000 |
>From TS-7200 Hardware Manual:
[COM1 is] full complement of RS-232 signals (all except Ring Detect)
allows COM1 to interface to almost any serial RS-232 device.
...
COM2 has RS-232 support only for the TXD and RXD signals. This is
sufficient to interface with the serial devices that only rqeuire
transmit and receive data lines.
This is basically the difference between the two COM ports.
That means that for communications with modem and other such devices
that needs more than the Rx and Tx lines, you cannot use the COM2.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] Re: rs232 vs rs485, Art |
|---|---|
| Next by Date: | [ts-7000] Re: COM2 Pinouts, mathlaj |
| Previous by Thread: | Re: [ts-7000] Re: rs232 vs rs485, Don W. Carr |
| Next by Thread: | [ts-7000] Re: rs232 vs rs485, Art |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU