On Thu, 2003-11-27 at 10:54 -0700, Eddie Dawydiuk wrote:
> Hello,
>
> > I have followed the instructions on the web page for Booting to the
> > SDCard, but the kernel version that was used is not the same as on
> > the developer card I received from TS.
> >
> > http://www.seiner.com/ts7000/index.php/Booting%20to%20SDCard
> >
> > When it loads none of the modules load with it. Example:
> >
> > Loading modules:
> > af_packet /lib/modules/2.4.26-ts11/kernel/net/packet/af_packet.o:
> > kernel-module version mismatch
> > /lib/modules/2.4.26-ts11/kernel/net/packet/af_packet.o was
> > compiled for kernel version 2.4.26-ts11
> > while this kernel is version 2.4.26-ts10.
>
> Interesting, the initial ramdisk only loads the sdcard module. There
> are no other modules in the initial ramdisk other than sdcard.o. The
> insmod command uses the -f option to force the sdcard module to load.
> As a result the module should load regardless of a kernel version
> mismatch.
>
> Maybe you have a ts11 kernel, but have ts10 modules. Please check
> /lib/modules on your SD card.
The instructions on the web page say to erase the kernel that was on the
flash and replace it with the zImage provided with the ramdisk in the
files section. Are you saying this was a mistake? The zImage provided
was ts10. The /lib/modules on my SD card are in the ts11 directory.
> > What I would like to know is what changes were made to the kernel to
> > implement the Boot to SDCard kernel, or just get a version 11 copy
> > of it. Otherwise I would just like to know where I can get my hands
> > on the modules directory for 2.4.26-ts10.
>
> The initrd should work with any kernel.
>
> //Eddie
The instructions should be changed to NOT change the kernel then.
>
--
Mike Magee <>
Remtrol Inc.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|