Hello,
> I have followed the instructions on the web page for Booting to the
> SDCard, but the kernel version that was used is not the same as on the
> developer card I received from TS.
>
> http://www.seiner.com/ts7000/index.php/Booting%20to%20SDCard
>
> When it loads none of the modules load with it. Example:
>
> Loading modules:
> af_packet /lib/modules/2.4.26-ts11/kernel/net/packet/af_packet.o:
> kernel-module version mismatch
> /lib/modules/2.4.26-ts11/kernel/net/packet/af_packet.o was
> compiled for kernel version 2.4.26-ts11
> while this kernel is version 2.4.26-ts10.
Interesting, the initial ramdisk only loads the sdcard module. There
are no other modules in the initial ramdisk other than sdcard.o. The
insmod command uses the -f option to force the sdcard module to load.
As a result the module should load regardless of a kernel version
mismatch.
Maybe you have a ts11 kernel, but have ts10 modules. Please check
/lib/modules on your SD card.
> What I would like to know is what changes were made to the kernel to
> implement the Boot to SDCard kernel, or just get a version 11 copy of
> it. Otherwise I would just like to know where I can get my hands on the
> modules directory for 2.4.26-ts10.
The initrd should work with any kernel.
//Eddie
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|