Re: [ts-7000] TS7200 Kernel update problems

["Janne Mäntyharju" <>]

The problem is not about how to download the kernel into board, that works fine. Writing kernel to flash seems to be the problem. Could someone with TS-7200 board check, what redboot reports flash address space to be, when board is powered up.

Thanks

--Janne


Eko Didik Widianto wrote:

i never fail when updating image via tftp, maybe you should try it. (but, i
never use serial port to download image)

below attached image when i updated kernel image. sorry for sending this file
to mailist.

On Monday 12 June 2006 20:49, Janne Mäntyharju wrote:
> The image I tried, was compressed. I can boot the board, by loading kernel
> to memory via serial port and executing it, but redboot won't allow
> anything to be written to flash. Flash itself seems to be working ok, but
> for some reason redboot says that flash addressspace end is at 0x60800000,
> even though redboot itself is saved at address 0x60E20000.
>

__._,_.___

SPONSORED LINKS

Linux os	Hardware	Arms
Computer internet	Computer security	Computer hardware security

---

YAHOO! GROUPS LINKS

•  Visit your group "ts-7000" on the web.
   
•  To unsubscribe from this group, send an email to:
   =Unsubscribe
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---

__,_._,___