i never fail when updating image via tftp, maybe you should try it. (but, i
never use serial port to download image)
below attached image when i updated kernel image. sorry for sending this file
to mailist.
On Monday 12 June 2006 20:49, Janne Mäntyharju wrote:
> The image I tried, was compressed. I can boot the board, by loading kernel
> to memory via serial port and executing it, but redboot won't allow
> anything to be written to flash. Flash itself seems to be working ok, but
> for some reason redboot says that flash addressspace end is at 0x60800000,
> even though redboot itself is saved at address 0x60E20000.
>
--
eko didik widianto
lab. desain pusat mikroelektronika ITB
jl. ganesha 10
bandung 40132
pt. clarisense digital media
jl. bukit dago utara II no. 27
bandung 40135
indonesia
------------------------ Yahoo! Groups Sponsor --------------------~-->
Get to your groups with one click. Know instantly when new email arrives
http://us.click.yahoo.com/.7bhrC/MGxNAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
kernel_update.jpg.zip
Description: Zip archive
|