To: | Lennert Buytenhek <> |
---|---|
Subject: | Re: [ts-7000] TS-7250 booting 2.6-git |
From: | uhmgawa <> |
Date: | Thu, 27 Apr 2006 19:34:16 -0400 |
Lennert Buytenhek wrote: > In 2.6 mainline, you don't have to specify at compile time which > ep93xx model you will be using. (In fact, it's even possible to > compile a single kernel for multiple different ep93xx boards.) I poked at 2.6.17-1 for a bit before I realized ep93xx_eth wasn't yet merged. Don't recall getting a clean build but I didn't have much motivation to try at that point. Mike: Is your 7250 a 9301 or 9302? And would you mind posting your .config? -- Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/ts-7000/ <*> To unsubscribe from this group, send an email to: <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [ts-7000] TS-7250 booting 2.6-git, Mike Taht |
---|---|
Next by Date: | Re: [ts-7000] TS-7250 booting 2.6-git, Mike Taht |
Previous by Thread: | Re: [ts-7000] TS-7250 booting 2.6-git, Lennert Buytenhek |
Next by Thread: | Re: [ts-7000] TS-7250 booting 2.6-git, Mike Taht |
Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU