To: | |
---|---|
Subject: | [ts-7000] TS-7250 booting 2.6-git |
From: | "Mike Taht" <> |
Date: | Wed, 26 Apr 2006 11:40:33 -0700 |
I am ressurecting my long dead ts-7250 project now that the 2.6-git kernel has support for it. (kudos to everyone working on that) My preliminary builds from 2.6-git have failed to boot though, and I'm thinking that perhaps it's because my bootloader isn't passing the correct machine identification up to the kernel? (I seem to remember that TS had arbitrarily chosen one at the time I'd got the board in the first place) Either that or my entry point is wrong (?) or the patchset bogus... Boot log below... >> TS-NANDBOOT, Rev 1.00 - built 14:57:51, Dec 30 2004 >> Copyright (C) 2004, Technologic Systems >> TS-BOOTROM, Rev 1.05 - built 14:48:39, Dec 30 2004 >> Copyright (C) 2004, Technologic Systems >> TS-7250: Rev E0 CPU, Rev A PLD, 64MB SDRAM, options ( MAX197-ADC ) +... waiting for BOOTP information Ethernet eth0: MAC address 00:d0:69:40:05:2d Can't get BOOTP info for device! RedBoot(tm) bootstrap and debug environment [ROMRAM] Non-certified release, version current-TS_5 - built 09:26:23, Jan 21 2005 Platform: TS-7250 Board (ARM920T) Rev A Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc. RAM: 0x00000000-0x02000000, [0x00051570-0x01ff9000] available FLASH: 0x60000000 - 0x68000000, 8192 blocks of 0x00004000 bytes each. == Executing boot script in 1.000 seconds - enter ^C to abort ^C RedBoot> ^C RedBoot> ip_address -l 10.129.129.213/24 -h 10.129.129.206 IP: 10.129.129.213/255.255.255.0, Gateway: 0.0.0.0 Default server: 10.129.129.206 RedBoot> ip_address -l 10.129.129.213/24 -h 10.129.129.206 IP: 10.129.129.213/255.255.255.0, Gateway: 0.0.0.0 Default server: 10.129.129.206 RedBoot> load -r -v -b 0x00218000 ep9302.zImage.eth Using default protocol (TFTP) \ Raw file loaded 0x00218000-0x0034d037, assumed entry at 0x00218000 RedBoot> exec -c "console=ttyAM0,115200" Using base address 0x00218000 and length 0x00135038 Uncompressing Linux......................... ......................................................... done, booting the kernel
-- Mike Taht PostCards From the Bleeding Edge http://the-edge.blogspot.com YAHOO! GROUPS LINKS
|
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [ts-7000] Re: TS-XDIO sample code., xioaya12 |
---|---|
Next by Date: | [ts-7000] Re: project with low power and fast boot process (on TS7300 or �), Jesse Off |
Previous by Thread: | [ts-7000] project with low power and fast boot process (on TS7300 or �), suptouch |
Next by Thread: | Re: [ts-7000] TS-7250 booting 2.6-git, Lennert Buytenhek |
Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU