Hello,
> Thanks for the reply. I had spoken to Technologic about the 2.6
> Kernel. They told me to get it from there.
>
> I did see te update here on the 2.6 here. Now I am just confused.
> According to the tech at Technologic, 2.6 is working and available.
> Not sure what he was talking about.
See message 2323...
//Eddie
> --- In Jim Jackson <> wrote:
>>
>>
>>
>>
>>
>> On Mon, 13 Mar 2006, anair253 wrote:
>>
>>> Hello all,
>>>
>>> Sorry if this has been asked before. I have downloaded the latest
>>> kernel from git.
>>>
>>> I used the directions from http://members.inode.at/m.burian/ep93xx/
>>
>> I believe there are more changes than that needed to get the 2.6
> kernel to
>> work with the technologics boards - have you seen the very recent
>> post from Lennert Buytenhek on the status of the ts-7xxx 2.6 port?
>>
>>
>>>
>>> I seem to have a good kernel zImage and vmlinux. However when I tftp
>>> to the TS7200 I can't seem to get it to boot.
>>>
>>> So far I have:
>>>
>>> load -v -r -b 0x0021800 -h 192.168.1.5 vmlinux
>>> fis delete vmlinux
>>> fis create vmlinux
>>> fis load vmlinux
>>> exec –c "console=ttyAM0,115200 root=/dev/hda1"
>>>
>>> The system looks like it is going to boot, but then hangs before it
>>> boots up all the way.
>>>
>>> I have also tried the same with zImage and booting from NFS and from
>>> the CF card.
>>>
>>> Any help would be greatly appreciated.
>>>
>>> Thanks in advance
>>>
>>> Ajai
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> Yahoo! Groups Links
>>>
>>>
>>>
>>>
>>>
>>>
>>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|