Jim,
Thanks for the reply. I had spoken to Technologic about the 2.6
Kernel. They told me to get it from there.
I did see te update here on the 2.6 here. Now I am just confused.
According to the tech at Technologic, 2.6 is working and available.
Not sure what he was talking about.
Thanks
Ajai
--- In Jim Jackson <> wrote:
>
>
>
>
>
> On Mon, 13 Mar 2006, anair253 wrote:
>
> > Hello all,
> >
> > Sorry if this has been asked before. I have downloaded the latest
> > kernel from git.
> >
> > I used the directions from http://members.inode.at/m.burian/ep93xx/
>
> I believe there are more changes than that needed to get the 2.6
kernel to
> work with the technologics boards - have you seen the very recent
> post from Lennert Buytenhek on the status of the ts-7xxx 2.6 port?
>
>
> >
> > I seem to have a good kernel zImage and vmlinux. However when I tftp
> > to the TS7200 I can't seem to get it to boot.
> >
> > So far I have:
> >
> > load -v -r -b 0x0021800 -h 192.168.1.5 vmlinux
> > fis delete vmlinux
> > fis create vmlinux
> > fis load vmlinux
> > exec ?c "console=ttyAM0,115200 root=/dev/hda1"
> >
> > The system looks like it is going to boot, but then hangs before it
> > boots up all the way.
> >
> > I have also tried the same with zImage and booting from NFS and from
> > the CF card.
> >
> > Any help would be greatly appreciated.
> >
> > Thanks in advance
> >
> > Ajai
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|