On Mon, 13 Mar 2006, anair253 wrote:
> Hello all,
>
> Sorry if this has been asked before. I have downloaded the latest
> kernel from git.
>
> I used the directions from http://members.inode.at/m.burian/ep93xx/
I believe there are more changes than that needed to get the 2.6 kernel to
work with the technologics boards - have you seen the very recent
post from Lennert Buytenhek on the status of the ts-7xxx 2.6 port?
>
> I seem to have a good kernel zImage and vmlinux. However when I tftp
> to the TS7200 I can't seem to get it to boot.
>
> So far I have:
>
> load -v -r -b 0x0021800 -h 192.168.1.5 vmlinux
> fis delete vmlinux
> fis create vmlinux
> fis load vmlinux
> exec ?c "console=ttyAM0,115200 root=/dev/hda1"
>
> The system looks like it is going to boot, but then hangs before it
> boots up all the way.
>
> I have also tried the same with zImage and booting from NFS and from
> the CF card.
>
> Any help would be greatly appreciated.
>
> Thanks in advance
>
> Ajai
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|