On Sun, 5 Feb 2006, sumit_shrivastava09 wrote:
> hi,
> I have one TS7250 bord .now I am supposed to port one application to
> this bord sothat i becomes one embedded system (this is for demo
> purpose , like I was asked to make it router but it is not possible
> because it has only one ethernet card , is it possible ) but I am not
> getting which application should I choose . can anybdoy suggest me
> this.
There are several possibilities....
It is possible to have a "router on a stick" :-)
It is possible to configure 2 or more different network addresses on the
same interface and route between them. There are reasons you might do
this.
In similar vein, you could setup a VPN tunnel to a VPN server or a PPP
over Ethernet connection and do routing.
You can get USB ethernet or WIFI adapters and do routing.
You could use one of the serial ports as a PPP over serial interface and
route.
You could use it to setup an 6to4 router (IPv6 to IPv4 encapsulation
tunnel - see rfc3056) and do IPv6 routing!
The possibilities are endless, if you are simply wanting some sort of demo
project.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|