Hello,
> Thank you very much. It does help. I get new problem
> as below
>
> Calculating module dependencies... depmod: ***
> Unresolved symbols in /lib/module
> s/2.4.26-ts9/kernel/drivers/net/ppp_deflate.o
> depmod: *** Unresolved symbols in
> /lib/modules/2.4.26-ts9/kernel/drivers/usb/cat
> c.o
> depmod: *** Unresolved symbols in
> /lib/modules/2.4.26-ts9/kernel/drivers/usb/usb
> net.o
> depmod: *** Unresolved symbols in
> /lib/modules/2.4.26-ts9/kernel/fs/cramfs/cramf
> s.o
> done.
Depmod is attempting to resolve all of the module dependencies,
but it is finding that ppp_deflate.o, catc.o, usb_net.o and
cramfs.o depend upon other modules that don't exist. If you
are not using these modules then the error messages are benign.
I'll look into where the symbols are defined, so these error
messages aren't printed in the future.
//Eddie
> does it will effect the system much? I'm not familiar
> with linux, so can you explain to me.
>
> Thanks again
>
> Ricki
>
> --- Eddie Dawydiuk <> 說：
>
>> Hello,
>>
>>> Hi, I want to create a large CF with 512Mb usb
>> drive and follow the
>>> instruction from
>>>
>>
> http://www.seiner.com/ts7000/index.php/EraseFlashImageAndReplace
>>
>> Those instructions are for the onboard filesystem on
>> the TS-7250 and
>> TS-7260. If you want to create a CF card with Debian
>> loaded on it refer
>> to the TS-ARM developers manual
>> (http://www.embeddedarm.com/Manuals/TS_ARM_L.PDF).
>> Refer to page 10,
>> the section is entitled "Compact Flash Card"...
>>
>>> 1. I fdisk the new 512Mb usb drive follow the
>> TS-ARM developers manual
>>> 2. I use wget to get the img file and tar to
>> mnt/src, the CF from TS
>>> is /dev/sda and my new usb drive is /dev/sdb1
>>>
>>> mount /dev/sdb1 /mnt/src
>>> wget -O -
>>
> ftp://oz.embeddedx86.com/images/debian256/debian256-10-27-
>>> 2005.tar | tar xvf - -C /mnt/src
>>>
>>> 3. Then I plug the new usb drive into the first
>> USB slot. Reboot and
>>>
>>> loadUSBModules.sh
>>> loadUSB.sh
>>>
>>> Then I get those error messages. $
>> /usr/bin/loadUSB.sh
>>>
>>> Creating extra device nodes...done.
>>> Started device management daemon v1.3.25 for /dev
>>> modprobe: cannot create
>> /var/log/ksymoops/19691231.log Read-only file
>>> system
>>> modprobe: cannot create
>> /var/log/ksymoops/19691231.log Read-only file
>>> system
>>> Checking root file system...
>>> fsck 1.27 (8-Mar-2002)
>>> e2fsck 1.27 (8-Mar-2002)
>>> modprobe: cannot create
>> /var/log/ksymoops/19691231.log Read-only file
>>> system
>>> modprobe: cannot create
>> /var/log/ksymoops/19691231.log Read-only file
>>> system
>>> modprobe: cannot create
>> /var/log/ksymoops/19691231.log Read-only file
>>> system
>>> modprobe: cannot create
>> /var/log/ksymoops/19691231.log Read-only file
>>> system
>>> modprobe: cannot create
>> /var/log/ksymoops/19691231.log Read-only file
>>> system
>>> modprobe: cannot create
>> /var/log/ksymoops/19691231.log Read-only file
>>> system
>>> fsck.ext2: No such file or directory while trying
>> to open /dev/hda1
>>>
>>> The superblock could not be read or does not
>> describe a correct ext2
>>> filesystem. If the device is valid and it really
>> contains an ext2
>>> filesystem (and not swap or ufs or something
>> else), then the
>>> superblock
>>> is corrupt, and you might try running e2fsck with
>> an alternate
>>> superblock:
>>> e2fsck -b 8193 <device>
>>>
>>>
>>> fsck failed. Please repair manually and reboot.
>> Please note
>>> that the root file system is currently mounted
>> read-only. To
>>> remount it read-write:
>>>
>>> # mount -n -o remount,rw /
>>>
>>> CONTROL-D will exit from this shell and REBOOT the
>> system.
>>>
>>> ts7200:~#
>>>
>>> Can anyone help me to correct the problem?
>>
>> By default /etc/fstab tells linux your
>> rootfilesystem is /dev/hda1, this
>> corresponds to the CF card. If you are using a USB
>> flash drive copy
>> /etc/fstab.usb to /etc/fstab on your USB flash
>> drive.
>>
>> //Eddie
>>
>
>
> ___________________________________________________ 最新版
> Yahoo!奇摩即時通訊 7.0，免費網路電話任你打！ http://messenger.yahoo.com.tw/
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|