Hello,
> Hi, I want to create a large CF with 512Mb usb drive and follow the
> instruction from
> http://www.seiner.com/ts7000/index.php/EraseFlashImageAndReplace
Those instructions are for the onboard filesystem on the TS-7250 and
TS-7260. If you want to create a CF card with Debian loaded on it refer
to the TS-ARM developers manual
(http://www.embeddedarm.com/Manuals/TS_ARM_L.PDF). Refer to page 10,
the section is entitled "Compact Flash Card"...
> 1. I fdisk the new 512Mb usb drive follow the TS-ARM developers manual
> 2. I use wget to get the img file and tar to mnt/src, the CF from TS
> is /dev/sda and my new usb drive is /dev/sdb1
>
> mount /dev/sdb1 /mnt/src
> wget -O - ftp://oz.embeddedx86.com/images/debian256/debian256-10-27-
> 2005.tar | tar xvf - -C /mnt/src
>
> 3. Then I plug the new usb drive into the first USB slot. Reboot and
>
> loadUSBModules.sh
> loadUSB.sh
>
> Then I get those error messages. $ /usr/bin/loadUSB.sh
>
> Creating extra device nodes...done.
> Started device management daemon v1.3.25 for /dev
> modprobe: cannot create /var/log/ksymoops/19691231.log Read-only file
> system
> modprobe: cannot create /var/log/ksymoops/19691231.log Read-only file
> system
> Checking root file system...
> fsck 1.27 (8-Mar-2002)
> e2fsck 1.27 (8-Mar-2002)
> modprobe: cannot create /var/log/ksymoops/19691231.log Read-only file
> system
> modprobe: cannot create /var/log/ksymoops/19691231.log Read-only file
> system
> modprobe: cannot create /var/log/ksymoops/19691231.log Read-only file
> system
> modprobe: cannot create /var/log/ksymoops/19691231.log Read-only file
> system
> modprobe: cannot create /var/log/ksymoops/19691231.log Read-only file
> system
> modprobe: cannot create /var/log/ksymoops/19691231.log Read-only file
> system
> fsck.ext2: No such file or directory while trying to open /dev/hda1
>
> The superblock could not be read or does not describe a correct ext2
> filesystem. If the device is valid and it really contains an ext2
> filesystem (and not swap or ufs or something else), then the
> superblock
> is corrupt, and you might try running e2fsck with an alternate
> superblock:
> e2fsck -b 8193 <device>
>
>
> fsck failed. Please repair manually and reboot. Please note
> that the root file system is currently mounted read-only. To
> remount it read-write:
>
> # mount -n -o remount,rw /
>
> CONTROL-D will exit from this shell and REBOOT the system.
>
> ts7200:~#
>
> Can anyone help me to correct the problem?
By default /etc/fstab tells linux your rootfilesystem is /dev/hda1, this
corresponds to the CF card. If you are using a USB flash drive copy
/etc/fstab.usb to /etc/fstab on your USB flash drive.
//Eddie
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|