Thank you very much. It does help. I get new problem
as below
Calculating module dependencies... depmod: ***
Unresolved symbols in /lib/module
s/2.4.26-ts9/kernel/drivers/net/ppp_deflate.o
depmod: *** Unresolved symbols in
/lib/modules/2.4.26-ts9/kernel/drivers/usb/cat
c.o
depmod: *** Unresolved symbols in
/lib/modules/2.4.26-ts9/kernel/drivers/usb/usb
net.o
depmod: *** Unresolved symbols in
/lib/modules/2.4.26-ts9/kernel/fs/cramfs/cramf
s.o
done.
does it will effect the system much? I'm not familiar
with linux, so can you explain to me.
Thanks again
Ricki
--- Eddie Dawydiuk <> 說：
> Hello,
>
> > Hi, I want to create a large CF with 512Mb usb
> drive and follow the
> > instruction from
> >
>
http://www.seiner.com/ts7000/index.php/EraseFlashImageAndReplace
>
> Those instructions are for the onboard filesystem on
> the TS-7250 and
> TS-7260. If you want to create a CF card with Debian
> loaded on it refer
> to the TS-ARM developers manual
> (http://www.embeddedarm.com/Manuals/TS_ARM_L.PDF).
> Refer to page 10,
> the section is entitled "Compact Flash Card"...
>
> > 1. I fdisk the new 512Mb usb drive follow the
> TS-ARM developers manual
> > 2. I use wget to get the img file and tar to
> mnt/src, the CF from TS
> > is /dev/sda and my new usb drive is /dev/sdb1
> >
> > mount /dev/sdb1 /mnt/src
> > wget -O -
>
ftp://oz.embeddedx86.com/images/debian256/debian256-10-27-
> > 2005.tar | tar xvf - -C /mnt/src
> >
> > 3. Then I plug the new usb drive into the first
> USB slot. Reboot and
> >
> > loadUSBModules.sh
> > loadUSB.sh
> >
> > Then I get those error messages. $
> /usr/bin/loadUSB.sh
> >
> > Creating extra device nodes...done.
> > Started device management daemon v1.3.25 for /dev
> > modprobe: cannot create
> /var/log/ksymoops/19691231.log Read-only file
> > system
> > modprobe: cannot create
> /var/log/ksymoops/19691231.log Read-only file
> > system
> > Checking root file system...
> > fsck 1.27 (8-Mar-2002)
> > e2fsck 1.27 (8-Mar-2002)
> > modprobe: cannot create
> /var/log/ksymoops/19691231.log Read-only file
> > system
> > modprobe: cannot create
> /var/log/ksymoops/19691231.log Read-only file
> > system
> > modprobe: cannot create
> /var/log/ksymoops/19691231.log Read-only file
> > system
> > modprobe: cannot create
> /var/log/ksymoops/19691231.log Read-only file
> > system
> > modprobe: cannot create
> /var/log/ksymoops/19691231.log Read-only file
> > system
> > modprobe: cannot create
> /var/log/ksymoops/19691231.log Read-only file
> > system
> > fsck.ext2: No such file or directory while trying
> to open /dev/hda1
> >
> > The superblock could not be read or does not
> describe a correct ext2
> > filesystem. If the device is valid and it really
> contains an ext2
> > filesystem (and not swap or ufs or something
> else), then the
> > superblock
> > is corrupt, and you might try running e2fsck with
> an alternate
> > superblock:
> > e2fsck -b 8193 <device>
> >
> >
> > fsck failed. Please repair manually and reboot.
> Please note
> > that the root file system is currently mounted
> read-only. To
> > remount it read-write:
> >
> > # mount -n -o remount,rw /
> >
> > CONTROL-D will exit from this shell and REBOOT the
> system.
> >
> > ts7200:~#
> >
> > Can anyone help me to correct the problem?
>
> By default /etc/fstab tells linux your
> rootfilesystem is /dev/hda1, this
> corresponds to the CF card. If you are using a USB
> flash drive copy
> /etc/fstab.usb to /etc/fstab on your USB flash
> drive.
>
> //Eddie
>
___________________________________________________ 最新版 Yahoo!奇摩即時通訊
7.0，免費網路電話任你打！ http://messenger.yahoo.com.tw/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|