thanks for the info
i had 99% finished the design and had opted to use level shifters
to ensure compatibility but may change back as it gives me a few
more options
i am working on a fpga board using a cyclone2 (ep2c20q240c8) fpga
i have used the 16 bit data format that the ts7200 uses for the
pc/104 although have been debating if i should support the std
pc/104 spec or stick to what the ts7200 uses
i also got to sort out its 1.2v reg , but in no rush to get it built
as yet
the design is going to be open source so may be usefull for others
anyway for any one interested the schematics and gerber files for it
can be downloaded from http://www.whipy.demon.co.uk/fpga1.zip
although dont try making it yet untill i get the thing finalized
there may be errors on it and i know of one
Dave
------------------------ Yahoo! Groups Sponsor --------------------~-->
Get Bzzzy! (real tools to help you find a job). Welcome to the Sweet Life.
http://us.click.yahoo.com/KIlPFB/vlQLAA/TtwFAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|