does the "init=/bin/sh" trick work?
http://groups.yahoo.com/group/ts-7000/message/1584
-Curtis.
On December 15, 2005 07:44 am, alipiec wrote:
> I have 2 devices that stops their init procedure on apache start.
> I cannot even log onto the system.
>
> I tried to run device from NFS - but /dev/mtdblock/1 device is seen as
> NFS device (not pointed to flash memory).
>
> How to update flash filesystems without the possibility to log in on
> local filesystem?
>
> I done:
> (redboot start procedure)
> fis load vmlinux
> exec -c "console=ttyAM0,115200 ip=dhcp nfsroot=172.18.20.195:/home/image"
>
> and it started without problems.
> Then i copied default TS-7250 flash filesystem and tried to do:
>
> dd if=TS-7250-32-default of=/dev/mtdblock/1
>
> and result is the same, I always got an error. It looks like
> /dev/mtdblock points to NFS filesystem not flash on-board memory...
>
> Best regards
> Arkadiusz Lipiec
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
------------------------ Yahoo! Groups Sponsor --------------------~-->
1.2 million kids a year are victims of human trafficking. Stop slavery.
http://us.click.yahoo.com/WpTY2A/izNLAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|