RE: [ts-7000] USB serial reset

["Daniel Perron" <>]

Add a 1000uF + 0.1 uF capacitor at the power connector terminal . this help!. I had the same problem with the CF reader.

B.T.W.  Even a fast fuse has a slow response time. The surge spike is so fast that the fuse doesn't heat .

 

Daniel

-----Original Message-----
From: [On Behalf Of Philip Heron
Sent: Friday, June 10, 2005 1:24 PM
To:
Subject: Re: [ts-7000] USB serial reset

On Fri, 2005-06-10 at 11:21 -0500, Andy Warner wrote:
> I'll bet it's the inrush current as all the caps in the GPS
> charge up. The TS-7200 is browning out.
> Try using a beefier 5V supply for the TS-7200.

My PSU is rated up to 2A at 5V. Should be more than enough. I think the
on-board fuse would have kicked in at about 800mA anyway.

I just tried an empty USB hub and the very same things happened. The hub
can't be drawing much power so maybe this isn't the problem.

My QuickCam is still running fine, plugs in without any trouble.

-Phil <>

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/ts-7000/
   
• To unsubscribe from this group, send an email to:
  =Unsubscribe
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.