| To: | |
|---|---|
| Subject: | Re: [ts-7000] USB serial reset |
| From: | Philip Heron <> |
| Date: | Fri, 10 Jun 2005 18:24:26 +0100 |
On Fri, 2005-06-10 at 11:21 -0500, Andy Warner wrote:
> I'll bet it's the inrush current as all the caps in the GPS
> charge up. The TS-7200 is browning out.
> Try using a beefier 5V supply for the TS-7200.
My PSU is rated up to 2A at 5V. Should be more than enough. I think the
on-board fuse would have kicked in at about 800mA anyway.
I just tried an empty USB hub and the very same things happened. The hub
can't be drawing much power so maybe this isn't the problem.
My QuickCam is still running fine, plugs in without any trouble.
-Phil <>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [ts-7000] USB serial reset, Andy Warner |
|---|---|
| Next by Date: | RE: [ts-7000] USB serial reset, Daniel Perron |
| Previous by Thread: | Re: [ts-7000] USB serial reset, Andy Warner |
| Next by Thread: | RE: [ts-7000] USB serial reset, Daniel Perron |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU