| To: | |
|---|---|
| Subject: | [ts-7000] Re: TS7250 won't boot after power failure |
| From: | "vocemanago" <> |
| Date: | Fri, 27 May 2005 01:11:07 -0000 |
--- In Curtis Monroe <> wrote:
> I can see the "<" character.
> the board boots every ~3 seconds, and it gives me another "<"
>
> I'd like to make a utility to run on my linux development machine that
> could look for the "<" send the 2048 byte boot code and run from there.
> But I'm not sure what the boot code does.
>
> -Curtis.
Well, the first thing it needs to do...is hit that watchdog.
...
yeah, i know...not helpful.
Tony
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [ts-7000] TS7250 won't boot after power failure, Curtis Monroe |
|---|---|
| Next by Date: | [ts-7000] Re: TS7250 won't boot after power failure, Jesse Off |
| Previous by Thread: | Re: [ts-7000] TS7250 won't boot after power failure, Curtis Monroe |
| Next by Thread: | [ts-7000] Re: TS7250 won't boot after power failure, Jesse Off |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU