| To: | |
|---|---|
| Subject: | [ts-7000] Re: How to get TS-SER1 to work |
| From: | "vocemanago" <> |
| Date: | Tue, 10 May 2005 10:54:27 -0000 |
> and in the dmesg I see
>
> ttyAM0 at MMIO 0x808c0000 (irq = 52) is a AMBA
> ttyAM1 at MMIO 0x808d0000 (irq = 54) is a AMBA
> ttyAM2 at MMIO 0x808e0000 (irq = 55) is a AMBA
> pty: 1024 Unix98 ptys configured
> Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
> enabled
> ttyS02 at 0x89c003e8 (irq = 40) is a 16550A
>
To be specific
ttyAM0 - main serial port on the TS-7200 motherboard (with the DB-9)
ttyAM1 - secondary serial port on the TS-7200 motherboard (2x5 connector)
ttyAM2 - not connected to anything
ttyS02 is your TS-SER1 board, though it is interesting that it picked
ttyS02 and not ttyS01, I am wondering if a jumper needs to move...
I suppose it doesn't matter, as long as it works.
Tony
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] Re: How to get TS-SER1 to work, vocemanago |
|---|---|
| Next by Date: | [ts-7000] Re: How to get TS-SER1 to work, othello61 |
| Previous by Thread: | [ts-7000] Re: How to get TS-SER1 to work, vocemanago |
| Next by Thread: | [ts-7000] Re: How to get TS-SER1 to work, othello61 |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU