Re: [ts-7000] [ts-7250] 5 internal (EP9302) ADC

["Eddie Dawydiuk" <>]

> I am trying to use the ts-7250 internal ADC from the EP9302 chip. The
> manual and example codes on the newsgroup only talk about the 8-
> channels ADC using the MAX197. Are the A/D and control registers the
> same for 8-channels as for the 5 internal channels? Any example code or
> help is much appreciated.

I have justed posted some example code in the files section. We recently
started to store board specific calibration values for each AtoD channel.
This code assumes your board has these calibration values and will use
them when calculating the voltage...

//Eddie



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/