[ts-7000] Copy to bigger CF Card

ts-7000

[ts-7000] Copy to bigger CF Card

To:
Subject:	[ts-7000] Copy to bigger CF Card
From:	"bozemanmt25" <>
Date:	Wed, 13 Apr 2005 18:47:45 -0000



I have a 256MB CF card with Debian that is bootable for my 7200 board.
I want to add a JVM and the card is full. So I got a 1GB card, but 
when I copy 'dd' the card from 256 to 1.0G the 1.0Gb doesn't seem to 
recognize the boot sector. It won't boot. 
Is there a trick I'm missing? This is possible correct? 

Thank you
Hunter





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Copy to bigger CF Card, bozemanmt25 <= [ts-7000] Re: Copy to bigger CF Card, agrimiore

Previous by Date:	Re: [ts-7000] Ethernet power on-off from an application, Jesse Off
Next by Date:	Re: [ts-7000] Ethernet power on-off from an application, Jim Jackson
Previous by Thread:	[ts-7000] Ethernet power on-off from an application, nagi_kann
Next by Thread:	[ts-7000] Re: Copy to bigger CF Card, agrimiore
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU