| To: | |
|---|---|
| Subject: | [ts-7000] Re: bootstrap TS7200 |
| From: | "vocemanago" <> |
| Date: | Wed, 13 Apr 2005 14:53:19 -0000 |
--- In "Jesse Off" <> wrote:
> Your board is not damaged, but its not going to boot again until its
flash
> can be reprogrammed. The serial boot won't work as-is because in
standard
> units the watchdog boots up armed and if it can't be reset within two
> seconds of bootup, it resets the board.
Is there "any" way of overiding the watchdog? A resistor to high on
the line or something? Scratch a trace...for a developer this may be a
necessary option, especially when you are in time trouble at 2am for a
project.
T.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [ts-7000] bootstrap TS7200, Jesse Off |
|---|---|
| Next by Date: | [ts-7000] Ethernet power on-off from an application, nagi_kann |
| Previous by Thread: | Re: [ts-7000] bootstrap TS7200, Jesse Off |
| Next by Thread: | Re: [ts-7000] bootstrap TS7200, Matthieu Crapet |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU