Hi,
On the TS-7200 I receive this output - (At the very bottom it
says "kernel panic" and will not continue loading the OS) This is
the second flash card I have tried working with and have followed
all installation instructions from the embedded website.
Thank you
Sincerely,
Alexander Soles
(906) 483-7592
BEGIN OUTPUT -----
>> TS-BOOTROM, Rev 1.03 - built 15:53:23, Oct 1
2004
>> Copyright (C) 2004, Technologic
Systems
>> TS-7200: Rev D1 CPU, Rev A PLD
>> Off-board serial at: COM5
+Ethernet eth0: MAC address 0
IP: 192.168.0.50/255.255.255.0, Gateway:
192.168.0.1
Default server: 192.168.0.1, DNS server IP:
192.168.0.1
RedBoot(tm) bootstrap and debug environment
[ROMRAM]
Non-certified release, version v2_0-TS_3 - built 17:11:16, Sep 14
2004
Platform: TS-7200 Board (ARM920T) Rev
A
Copyright (C) 2000, 2001, 2002, Red Hat,
Inc.
Copyright (C) 2004, Technologic
Systems
RAM: 0x00000000-0x02000000, 0x00053ef0-0x01fdd000
available
FLASH: 0x60000000 - 0x60800000, 64 blocks of 0x00020000 bytes
each.
== Executing boot script in 0.100 seconds - enter ^C to
abort
RedBoot> fis load vmlinux
RedBoot> exec -c "console=ttyAM0,115200
root=/dev/hda1"
Using base address 0x00
Linux version 2.4.26-vrs1-cirrus-1-2-1-ts3 (gcc
version
3.3.4)
#1 Wed Sep 15 14:46:43 MST 2004
CPU: Arm920Tid(wb) revision 0
Machine: ep9301
On node 0 totalpages: 4096
zone(0): 6144 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 1 totalpages: 4096
zone(0): 6144 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyAM0,115200
root=/dev/hda1
Calibrating delay loop... 81.51
BogoMIPS
Memory: 8MB 8MB 8MB 8MB = 32MB
total
Memory: 28660KB available (1224K code, 299K data, 60K
init)
Dentry cache hash table entries: 4096 (order: 3, 32768
bytes)
Inode cache hash table entries: 2048 (order: 2, 16384
bytes)
Mount cache hash table entries: 512 (order: 0, 4096
bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096
bytes)
Page-cache hash table entries: 8192 (order: 3, 32768
bytes)
CPU: Testing write
POSIX conformance testing by
UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society
NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis
Communications
AB.
ttyAM0 at MMIO 0x808c0000 (irq = 52) is a
AMBA
ttyAM1 at MMIO 0x808d0000 (irq = 54) is a
AMBA
ttyAM2 at MMIO 0x808e0000 (irq = 55) is a
AMBA
pty: 1024 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
enabled
rtc: no TS-5620 RTC detected.
ep93xx_eth() version: ep93xx_eth.c: V1.0 09/04/2003 Cirrus
Logic
RAMDISK driver initialized: 16 RAM disks of 12288K size 1024
blocksize
about to do sbc_setinfo
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-
2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with
idebus=xx
Technologic Systems TS-7XXX IDE initialization - driver version 1.3,
6/21/04.
hda: SanDisk SDCFH-256, CFA DISK
driv
ide0 at 0x8d000000-0x8d000007,0x88400006 on irq
32
hda: attached ide-disk driver.
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete
Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: 501760 sectors (257 MB) w/1KiB Cache, CHS=980/16/32
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2
cfi_cmdset_0001: Erase suspend on write enabled
Using buffer write method
JP3 is set
CFI: Found no TS-7200 high flash device at location zero
Creating 3 MTD partitions on "TS-7200 flash":
0x00000000-0x00020000 : "TS-BOOTROM"
0x00020000-0x00620000 : "Linux"
0x00620000-0x00800000 : "RedBoot"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.97 (double precision)
/dev/ide/host0/bus0/target0/lun0: p1 p2
/dev/ide/host0/bus0/target0/lun0: p1 p2
/dev/ide/host0/bus0/target0/lun0: p1 p2
/dev/ide/host0/bus0/target0/lun0: p1 p2
Kernel panic: VFS: Unable to mount root fs on 03:01
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|