I've used this board via the serial port to the 7200 and it works great.
http://www.pololu.com/products/pololu/0240/
Let me know if you'd like more info, but their documentation is pretty good.
-----Original Message-----
From: bozemanmt25
Sent: Thursday, March 10, 2005 12:33 AM
To:
Subject: [ts-7000] USB crashes board when running on batteries??? and
servos?
I'm trying to run the board off a battery pack. I have a 5v
regulator and the board works just fine until I try to run the USB
wireless card, and then the board crashes.
Has anybody successfully ran the board off the CF, and the wireless
USB with a battery pack?
I'm trying to make a robot that needs to be mobile, but also needs
to communicate with my laptop.
Is there a low consumption USB wireless card? I don't need a lot of
distance, 40 feet is plenty.
On another point has anybody controlled a servo from the board?
Thanks
Yahoo! Groups Links
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|