Hi.
David WennstrÃm kirjoitti:
>
> Hello,
>
>
>
> Is there any way to reduce latency? (I am using the SPC900NC camera.)
>
If you have any budget at all I would recommend going for Firewire (raw
bayer output) cameras. For example the ones from the imaging source work
ok. You can get to 60 fps without too much trouble.
>
>
> I am building a head tracker software (for my masterâs thesis) wants
> to reduce lag. I have measured the latency from picture taken in
> camera to user program to about 80 ms setting the fps = 30, shutter =
> 30000 and gain = 65000 parameters (I want a dark image filtering out
> light points).
>
>
>
I assume you are doing the "classical" color blob detection + 3D
tracking(?) There are lots solutions out there, but I assume you want to
build your own system.
--
====================================================
Tommi Ilmonen
Tel: +358-50-3841 543
Ubiquitous Interaction Research Group
Helsinki Institute for Information Technology
http://www.hiit.fi/ubiquitousinteraction/
====================================================
_______________________________________________
pwc mailing list
http://lists.saillard.org/mailman/listinfo/pwc
|