Yes. Please do.
Thanks, Jonas!
On Tue, Feb 17, 2015 at 1:11 PM, 'Jonas Gruska'
[naturerecordists] <> wrote:
>
>
> You can just upload the file directly to OSHPark to order, no need for th=
e
> actual software (which in my case is Eagle CAD - it has a freemium versio=
n
> too).
>
> My boards are on the way from fab, should arrive this week. I will check
> them and send you the file when I am 100% sure they work fine :)
>
> Jonas
>
> On 17 Feb 2015, at 20:59, Keith Smith
> [naturerecordists] wrote:
>
> I'd be interested to see it, but don't know if I'd be able to open it.
> I've
>
> been playing with LTSpice a bit, but don't have anything yet to write/rea=
d
>
> gerber files.
>
> I have a pal who has an old copy of OrCad that might be able to help.
>
> Thanks.
>
> Keith
>
> On Tue, Feb 17, 2015 at 12:48 PM, 'Jonas Gruska'
>
> [naturerecordists] <> wrote:
>
>
>
> Yeah, it fits in XLR shell without a problem. I actually designed a littl=
e
>
> circuit board with smt parts exactly for this purpose. Shaving-off weight
>
> is always good!
>
> If you want I can send you the board file. I had the board made at
>
> oshpark.com
>
> Jonas
>
> On 17 Feb 2015, at 20:45, Keith Smith
>
> [naturerecordists] wrote:
>
> Thanks Jonas!
>
> That does look attractive. Too bad I just put my Mouser order in an hour
>
> ago :( Next time.
>
> Seems like you could get that whole circuit inside a Neutrik male XLR?
>
> The DI works well on my Marantz PMD 661 and almost as well in the Tascam
>
> HDP2., but it sure would be nice to get rid of the weight (and the extra
>
> cables even more).
>
> k
>
> =E2=9C=BA =E2=9C=BA =E2=9C=BA
>
> homepage <http://jonasgru.sk>
>
>
>
>
>
> --
>
> Keith Smith - KeithSmith.ca_Freelance Guitarist & Location Recording
> Service
>
> <http://www.keithsmith.ca>
>
>
> =E2=9C=BA =E2=9C=BA =E2=9C=BA
> homepage <http://jonasgru.sk>
>
>
>
--
Keith Smith - KeithSmith.ca_Freelance Guitarist & Location Recording Servic=
e
<http://www.keithsmith.ca>
|