You can just upload the file directly to OSHPark to order, no need for
the actual software (which in my case is Eagle CAD - it has a freemium
version too).
My boards are on the way from fab, should arrive this week. I will check
them and send you the file when I am 100% sure they work fine :)
Jonas
On 17 Feb 2015, at 20:59, Keith Smith
[naturerecordists] wrote:
> I'd be interested to see it, but don't know if I'd be able to open it.
> I've
> been playing with LTSpice a bit, but don't have anything yet to
> write/read
> gerber files.
> I have a pal who has an old copy of OrCad that might be able to help.
> Thanks.
> Keith
>
>
> On Tue, Feb 17, 2015 at 12:48 PM, 'Jonas Gruska'
> [naturerecordists] <> wrote:
>
>>
>>
>> Yeah, it fits in XLR shell without a problem. I actually designed a
>> little
>> circuit board with smt parts exactly for this purpose. Shaving-off
>> weight
>> is always good!
>>
>> If you want I can send you the board file. I had the board made at
>> oshpark.com
>>
>> Jonas
>>
>> On 17 Feb 2015, at 20:45, Keith Smith
>> [naturerecordists] wrote:
>>
>> Thanks Jonas!
>>
>> That does look attractive. Too bad I just put my Mouser order in an
>> hour
>>
>> ago :( Next time.
>>
>> Seems like you could get that whole circuit inside a Neutrik male
>> XLR?
>>
>> The DI works well on my Marantz PMD 661 and almost as well in the
>> Tascam
>>
>> HDP2., but it sure would be nice to get rid of the weight (and the
>> extra
>>
>> cables even more).
>>
>> k
>>
>>
>> =E2=9C=BA =E2=9C=BA =E2=9C=BA
>> homepage <http://jonasgru.sk>
>>
>>
>>
>
>
>
> --
> Keith Smith - KeithSmith.ca_Freelance Guitarist & Location Recording
> Service
> <http://www.keithsmith.ca>
=E2=9C=BA =E2=9C=BA =E2=9C=BA
http://jonasgru.sk
|