[Top] [All Lists]

Re: Motion sensor automated recording with a Sound devices 744t.

Subject: Re: Motion sensor automated recording with a Sound devices 744t.
From: "Jonas Gruska" mrqwa
Date: Mon Dec 22, 2014 10:34 pm ((PST))
Dear Daniel,

it might be worth a try to ask Sound Devices for specs of the C-link
protocol, so we could theoretically make our own solutions.
I think it would help a lot of fellow recordists. Good luck, and let me
know if you ever found a solution!


On 23 Dec 2014, at 7:32, Daniel Rossi 
[naturerecordists] wrote:

> Hi there I have a trick question and I thought I should ask it here. I
> have an opportunity to record some captive nocturnal animals in a
> breeding enclosure and require a way to start recording at night when
> motion is detected. The place I am collaborating with on have a motion
> sensor setup for their camera which is what they use to observe
> them.=C2=A0
> I am trying to find out if anyone has done such a thing for any
> recorder I guess. The sound devices has a C1 remote adaptor for an
> external keyboard which could possibly be modded to remotely record
> with a motion sensor connection. That is my goal but the possibility
> I=E2=80=99m not sure of and would have to record overnight until the batt=
> runs out. =C2=A0
> Let me know thanks.=C2=A0
> --=C2=A0
> Daniel Rossi

=E2=9C=BA =E2=9C=BA =E2=9C=BA

<Prev in Thread] Current Thread [Next in Thread>

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU