[Top] [All Lists]

Re: Tascam DR680 + 2 Audio Technica AT4022 Omnidirectional Condenser

Subject: Re: Tascam DR680 + 2 Audio Technica AT4022 Omnidirectional Condenser
From: "tankramjet" tankramjet
Date: Wed Jun 12, 2013 3:15 pm ((PDT))
So I bought the kit I mentioned in this thread today! I've been researching=
 the windscreen solution as well as closely going over everyone's comments =
about options for windscreens.  I wish I could buy the deadcat one availabl=
e on Ebay.UK however they don't ship to north america.

Anyone have a premade product that would fit on the at4022 with the foamy i=
n place?  And would that make sense to have when they mics will be strapped=
 on either side of a yoga block?


--- In  "Jorgen" <> wro=
> A tip for you: You can buy a pair of small furrys made for Rode M3 by Cam=
era Nation on Ebay. They fit like gloves over the AT4022 with the foam shie=
lds on.
> I bought a pair for 20 pounds a while ago. They have a new version out th=
at sells for 26 pounds plus postage a pair. They're perfect for the AT4022'=
> --- In  Ryan Logtenberg <ryanlogtenberg@=
> wrote:
> >
> > Hi all,
> >
> > Time to stop sitting on the sideline for me.  This is what I plan on
> > buying to record some nice
> > soundscapes in the forest.
> >
> > My cost will be around $1300 for this kit:
> >
> > Tascam DR680
> > 2 x AT4022 Omnidirectional condensers
> > 1 foam/cork yoga block that I'll use to create an DIY SASS array
> > 1 generic tripod
> >
> > I have heard that I don't need to really worry about wind noise with
> > these types of microphones except in really windy locations.  Is this
> > true?
> >
> > With my budget, would you recommend something different?
> >
> > Thanks!
> > Ryan
> >

<Prev in Thread] Current Thread [Next in Thread>

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU