Date: Mon Feb 25, 2013 3:52 pm ((PST))
Hi Marco!
Good to hear from you.
Thanks for this link, it looks very interesting. I'm about to have an early=
night, so studying it will have to wait until tomorrow.
Cheers
Max
--- In wrote:
>
> Hi Max,
> this is the link
> http://www.dslrfilmnoob.com/2012/11/25/irig-pre-hack-cheap-xlr-phantom-po=
wer-preamp-dslr/
> in order to do a "simple" internal hack to the IRig Pre and thus avoid ha=
ving to use the special cable that requires a long time to receive it (at l=
east here in Italy!).
> In this way, the headphone output becomes the mic output.
> I think in the next days I will try to do it.
> The site was reported to me by a friend of mine, Roberto Serra of Milan, =
Italy.
>
> Marco Pesente
>
>
> --- In "Max" <maxcatterwell@> wrote:
> >
> > Hi Marco!
> > 50 days; unreal!!
> > You will find a much better signal with MIC IN rather than LINE. Howeve=
r, I'm not a technical man and am not sure this is correct; BUT, it does wo=
rk well. I put the volume wheel of my LS-10 on 10 and set on LOW setting. L=
ike this you need only use the gain control on the iRigPre. Be careful to r=
educe gain on iRigPre to zero before turning on, or connecting to Olympus!
> > Have fun, and let us know how you progress.
> > Cheers
> > Max
> >
> >
> > --- In m.pesente@ wrote:
> > >
> > >
> > >
> > > Finally, after about 50 days, I received the cable to right connect t=
he IRig Pre to one of my digital recorders!
> > > At a first look, using an AT3032 + IRigPre 48V Ph to Line IN, it seem=
s the recorded signal is much more high with Roland R05 than Olympus Ls5.
> > > I'll perform a practical test as soon as possible, also considering t=
he Sony M10.
> > >
> > > Marco Pesente
> > >
> > >
> > >
> > >
> > > --- In "Max" <maxcatterwell@> wrote=
:
> > > >
> > > > Hi Marco!
> > > > Many thanks for your good wishes; it's appreciated.
> > > > I am amazed that you still haven't received your cable! Did you con=
tact the seller, or is the Italian Postal Service really that bad?!
> > > > All the best for now
> > > > Max
> > >
> >
>
|