Subject: | 1. Re: Foam for SASS foam info |
---|---|
From: | "bleublancrouge24" bleublancrouge24 |
Date: | Sat Jul 14, 2012 10:49 am ((PDT)) |
hi there, i came across an posting from 2010 where foam was discussed and a link from rob danielson to where he sourced his foam from... Glad to share. :) I asked the same question on the old BndryMic list and this is the source Rob replied with: Quarter Sheet 24" x 72" x 4" $ 45.12 $ 13.00 shipping http://www.foamfory ou.com/charcoal_ foam.htm# Charcoal maybe this will help. P. --- In Gianni Pavan <> wrote: > > Hi, I found some types of open cell foam sold in blocks to make filters for > acquaria; the type I found are not very soft and have open cells up to 2-3 > mm in diameter. We use them to protect hydrophones as they don't hold air > bubbles. However I never tested them to verify their acoustic properties > in air and their efficacy against wind. > > Gianni > > 2012/7/8 John Crockett |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Olympus LS5, LS7 and Sony M10 internal mics comparison., robin_parmar_sound |
---|---|
Next by Date: | 2. Re: Foam for SASS foam info, Mitch Hill |
Previous by Thread: | Olympus LS5, LS7 and Sony M10 internal mics comparison., m.pesente@tiscali.it |
Next by Thread: | 1. Re: Foam for SASS foam info, John Crockett |
Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU