12. Re: R-44 issue
Fri Jun 22, 2012 1:44 am ((PDT))
Jez, can you confirm that the XLR adapter is a proper DPA regulator type?
I've seen on the net some ridiculous wiring advice for DPA4060 XLR phantom =
aadapters which basically short pins 1&3 and place a 1K resistor from pin 2=
to 1. This would draw in excess of 13mA.
Although the R44 is capable of supplying multiple 4060s wired correctly, th=
e R44 spec does say "8mA per 1 channel".
On other more beefy recorders this may not be an issue.
|<Prev in Thread]
||[Next in Thread>|
- 12. Re: R-44 issue,
The University of NSW School of Computer and Engineering
takes no responsibility for the contents of this archive. It is purely
a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way.
If you wish to get material removed from the archive or
have other queries about the archive e-mail
Andrew Taylor at this address: