=A0
thanks Grant, according to DPA the r-44 supplies more than enough power to=
handle even 4 of the DPA4060's connected & these issues appear even if just=
one
is attached. The powering issue also wouldn't explain the pick up of the
internal electronics of the recorder (regardless of mic position) & i'm mor=
e &
more convinced that its some strange way the Roland recorders are built tha=
t
happens to come up with these issues when using this particular mic. That s=
aid,
one chap who also has the R-44 & the DPA4060's has mentioned that his work =
fine
!
arghhhhhh !
--- In "Grant Finlay" <> wrote:
>
> It's called "motor boating"
> The non-techy explanation is that it can't supply enough power to the mic=
s, you
>need to roll off some of the bottom end to get around this.
> Or use an outboard PH48v supply.
> The SD302 has this issue too with various mics, sanken cs-1 etc..
>
> Regards,
> Grant.
> http://naturesounds.co.nz
>
|