Subject: | 1. Re: SD 7 series recorders with / without a 302 |
---|---|
From: | "jtudor2005" jtudor2005 |
Date: | Sun Apr 22, 2012 6:58 pm ((PDT)) |
--- In Dan Dugan <> wrote: > > > Just be aware that the 788 won't record at high sample rates (tops at 4= 8ish I think) Whereas I always record at 24/96. So that alone woould be the= deal braker for me on the 788. There has been much discussion on the SD fo= rum from users wanting at least 96 when using a reduced channel count. > > The 788T firmware rev. 2.15 can record at sample rates above 48kHz, toppi= ng out at 96k. At high rates the channel count is limited to eight, input l= imiters are disabled, high speed UDMA CompactFlash cards must be used, and = only two storage media can be used at a time. > > Disclosure: I am a Sound Devices dealer. > > -Dan > Thanx Dan You should tell SD to update the 788 Fact Sheet PDF for the unit. Disclosure: I am a Sound Devices user -John |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Composite detection, Luis do Carmo |
---|---|
Next by Date: | 2. Re: SD 7 series recorders with / without a 302, Munir kureshi |
Previous by Thread: | 1. Re: SD 7 series recorders with / without a 302, vickipowys |
Next by Thread: | 2. Re: SD 7 series recorders with / without a 302, Jez |
Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU