naturerecordists
[Top] [All Lists]

1. Re: D.I.Y. With MX391 AT3032 Vs MX391

Subject: 1. Re: D.I.Y. With MX391 AT3032 Vs MX391
From: "tk7859" tk7859
Date: Tue Feb 14, 2012 3:14 pm ((PST))
Hi All

Following comment by Emanuele and Haken in previous posts on this topic I 
decided to compare the performance of the MX391s in the new boundary rig with  
AT3032s in a similar rig.  Another reason for the test was to better asses the 
stereo field because the initial test recording seemed to have a hole in the 
middle (probably due to the presence of a building directly in front of the 
position of the rig).

With all this in mind i went out to a local beach this morning and set up the 
two rigs. Both boundary rigs are built in exactly the same way using the same 
materials.  The only difference being the distance between the boundary plates 
- the MX391 ones being slightly wider apart to cater for the difference in 
capsule diameters of the two types of microphones.  For both rigs the distance 
between the centres of the capsules is   5 7/8 inches (150mm).  The face of the 
capsules in both rigs are 1 inch (25mm) from the front of the boundary plate.

The Olympus  LS-10, on pip power,  was set to record level High 5 and the 
Marantz 661, with phantom supply to the AT3032s, was set at record level 6.5.  
WAV at 16, 44.1 was used.

Photos taken during the test are in the picassa album.  The captions to the 
photos will give a bit more background


https://picasaweb.google.com/G0SBW.PM/AT3032MX391BeachTestFebruary142012?authuser=0&feat=directlink



Two snippets of the same period of the recording are on Soundcloud below.  The 
first 90 seconds are from the AT3032 and the second 90 are from the MX391.  The 
time of the samples covers the period when the surveyor was walking in the sea 
in front of the rigs (see photo captions)  The tapping of his survey wand on 
the sea floor can be heard.  Other than applying fades in and fades out and 
converting to MP3 320 no sound editing has been used.


http://soundcloud.com/g0sbw/at3032-mx391waves


To my ear the MX391s sound slightly more crisp.

When listening on headphones a deep throb can be heard on both snipppets.  It 
sounds like an engine of the type of boat which services the offshore wind farm 
just visible in the first photo.  I was not aware of a boat or the noise at the 
time of the recording.

Hope the test is of use to those interested.

Cheers
Tom Robinson











<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU