[Top] [All Lists]

Re: smallest 192k audio interface

Subject: Re: smallest 192k audio interface
From: "Flawn Williams" flawn1951
Date: Tue Oct 25, 2011 11:07 am ((PDT))
I use a Lenmar battery pack with a USB output, the USBPre2 powers up fine from 
that. Many many hours of operation.

It can also run from AC through the Lenmar pack, since the battery charger can 
be hooked up to the battery at the same time that the battery is feeding power 
to the USBPre2.


On Oct 25, 2011, at 12:39 PM,  wrote:

> Hi,
>   Do sound devices provide a USB to 12V or 5V power block or similar? What 
> batteries do you use when using it in stand alone mode or is there a battery 
> compartment for this?
> Is the USBPre2 vastly different from the MixPre-D ? The latter doesnt have 
> optical output - Im considering the USBPre2 for use with my Sony D50 (optical 
> in) - however the input impedance is a little low at 2K? 
> for dynamic and ribbon mics.
> -Mike.

"While a picture is worth a thousand words, a 
sound is worth a thousand pictures." R. Murray Schafer via Bernie Krause.

Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Digest Email  | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

<Prev in Thread] Current Thread [Next in Thread>

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU