naturerecordists
[Top] [All Lists]

Re: Olympus LS-7 vs. LS-11

Subject: Re: Olympus LS-7 vs. LS-11
From: "Raimund" animalsounds
Date: Mon May 16, 2011 4:46 am ((PDT))
> So I'm curious why you measure noise at maximum gain setting instead of a=
t
> the gain setting that has lowest noise?

I agree that it would also be interesting to know the noise floor at the ot=
her gain settings. Unfortunately, this would make things much more complica=
ted and the time that I can spend on these tests is limited. In almost all =
cases however, the lowest noise floor (expressed in absolute voltages) appe=
ars only at the maximum gain setting.

Regards,
Raimund








<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU