Many thanks to James, Stuart, Kevin and Erick for your replies, between you I
now have a good set of leads to get going.
C
--- In "s.fairbairn" <> wrote:
>
> Chris.
>
>
>
> Find out the thread type of the camera mount for the tripod and buy a
> suitable matching nut from a hardware store. Drill a hole in the wooden base
> of the PBB2N just a whisker smaller in diameter and a depth similar to the
> nut thickness. Now put a small amount of grease or vaseline on the nut
> thread. Apply a suitable adhesive, Araldite, to the sides of the hole in the
> base and push the nut in and let the Adhesive set. The grease is to stop any
> wayward Araldite from sticking to the nut thread. Stuart.
>
>
>
> _____
>
>
>
>
>
>
"While a picture is worth a thousand words, a
sound is worth a thousand pictures." R. Murray Schafer via Bernie Krause.
------------------------------------------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/naturerecordists/
<*> Your email settings:
Digest Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/naturerecordists/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
------------------------------------------------------------------------
|