Re: Tripod mounts

["s.fairbairn" stuartfairbairn62]

Chris.



Find out the thread type of the camera mount for the tripod and buy a
suitable matching nut from a hardware store. Drill a hole in the wooden bas=
e
of the PBB2N just a whisker smaller in diameter and a depth similar to the
nut thickness. Now put a small amount of grease or vaseline on the nut
thread. Apply a suitable adhesive, Araldite, to the sides of the hole in th=
e
base and push the nut in and let the Adhesive set. The grease is to stop an=
y
wayward Araldite from sticking to the nut thread. Stuart.



  _____