naturerecordists
[Top] [All Lists]

Re: PBB2N Plans

Subject: Re: PBB2N Plans
From: "Rick Munday" baumann1965
Date: Wed Nov 17, 2010 3:45 am ((PST))
Very cool. Thanks!

Funny thing, I knew the image was large. It never dawned on me to even chec=
k
if it was to scale. :-) Tracing lines sure is quicker than measuring them
all out.



On Tue, Nov 16, 2010 at 11:36 PM, Rob Danielson <> wrote:

>
>
> Rick & Hector--
> I've updated the plans for the PBB2N at http://tinyurl.com/2c6xrcm.
> Refresh your browser.
>
> A few of the measurements were off an 1/8th of an inch and the scale
> was not 1:1.
>
> I double-checked measurements against a build so they should be quite
> reliable now. Thanks for letting me know! :-) Rob D.
>









<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU