Thanks Vicki! The LS10 is the recorder we're looking at and you provided a
real world example.
Was this a 9V battery as others are posting or something else?
Every post here get's me more excited about recording.
On Tue, Oct 12, 2010 at 10:17 PM, vickipowys <>wro=
te:
>
>
> I had no improvement in gain when using PIP mics via a battery box to
> an Olympus LS10. The signal strength and noise levels were about the
> same with or without the battery box.
>
> The one advantage I found though, for a battery box to LS10, was when
> using a long lead (25 metres in my case), where I placed the battery
> box at the mic end then ran the signal only (not the power) back
> through the cable to the recorder. That way I had no crackling if I
> happened to move the input plug going into the LS10. Previously when
> running power from the LS10 to the mics via a 25 m lead, the input
> plug was prone to crackle with the slightest bump.
>
> Vicki
>
>
|