naturerecordists
[Top] [All Lists]

[Nature Recordists] Creating delrin mic supports for SASS

To:
Subject: [Nature Recordists] Creating delrin mic supports for SASS
From: Kenton Brede <>
=C2=A0
I'm looking into building a SASS for ambient nature recording. I've looked
at Walt's build page and I don't have the tools for building the delrin mic
supports.

http://frogrecordist.home.mindspring.com/docs/making_sass-1.html

I was wondering if anyone here would be willing to build me a couple? If
so, email me offline with your cost. I do have a drill press that I could
probably use to approximate what he's done. I don't know exactly how tight
the tolerances have to be. Or maybe I'll come up with some other way to
mount the mics.

Anyway, if anyone has some thoughts let me know. This is still up in the
air, I haven't purchased the mics or the SASS housing yet.
Thanks,
Kent














<Prev in Thread] Current Thread [Next in Thread>
  • [Nature Recordists] Creating delrin mic supports for SASS, Kenton Brede <=
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU