David,
Not sure if this will help, but there is a pre-set no. 2 'MS Spread'
that may allow independent adjustment of levels.
Vicki
On 30/08/2010, at 12:47 PM, David Michael wrote:
> For those who are equalizing thier LR stereo recordings in M-S, I have
> stumbled on something tonight that may be of some interest. The
> apQualizr plugin supports this operation with what it calls M-S stereo
> mode.
>
> On the lower right of the interface is a section labled 'stereo mode'.
> If you select the M-S button, your source LR stereo signal is encoded
> to M-S, filters are applied as you define them, and then the signal is
> decoded back to LR for you. This would replace using a pair of +matrix
> plugs and separate EQs. You can even specify whether to apply each
> filter to the mid or the side signal or both.
>
> The manual has a bit more and a picture.
>
> The one short coming of this mode as far as I can tell is that you
> cannot independently adjust the gain of each signal, you still only
> get the master gain which affect both signals. Please let us know of
> you find an answer to this. Otherwise you can always follow the
> apQualizr with a pair of +matrix as necessary.
>
> I was pretty psyched to find this feature staring me in the face. Hope
> this helps out someone else as well.
>
> Happy EQing
> David
>
>
>
>
|