| Subject: | 6. Re: M/S recording setup |
|---|---|
| From: | "jtudor2005" jtudor2005 |
| Date: | Tue Aug 17, 2010 3:07 pm ((PDT)) |
--- In Rob Danielson <> wrote: > > At 10:09 PM -0700 8/16/10, Dan Dugan wrote: > > > > > >What Rob said, except I think it would be clearer to use the term > >"matrix" rather than "encode." > > > > I made a grammar error, the recorder _de-codes_ mic channels 1 and 2 > into L/R. I looked it up in the SD manual and they use "decode." Rob I use the very good (and free) Voxengo M/S plugin. I ALWAYS record into my = SD702 as discrete M & S channels and monitor it in M/S. Until I understood = it was decode (not encode) I was using the Voxengo plugin to 'Encode' the M= /S to L/R. Interestingly, the result was the same but with a lower final ga= in than if I'd 'decoded' it. |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [Nature Recordists] M/S recording setup, Rob Danielson |
|---|---|
| Next by Date: | 7. Re: M/S recording setup, Mike Rooke |
| Previous by Thread: | 5. Re: M/S recording setup, Marcus Buick |
| Next by Thread: | 6. Re: M/S recording setup, Dan Dugan |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU