a survey of mic capsule-to-blimp dimensions

["Dan Dugan" dandugan_1999]

I'm designing a field calibrator for mics in windscreens. It will put a ton=
e on your recording by which you can balance channels either on the recorde=
r or in post production. It will provide a known SPL at the mic capsule so =
the original SPLs of the recorded sound can be measured later.

It will have a slider that is adjusted to compensate for the distance from =
the front of the windscreen assembly to the actual mic diaphragm, on-axis. =
It would be helpful for me if you would measure that distance in your rig s=
o I can be sure to accommodate the range of distances found in the real wor=
ld.

MS users also please tell me the width of your windscreen. I'll assume the =
S diaphragm is in the middle.

Please respond off-list to 

Thanks, Dan








"While a picture is worth a thousand words, a
sound is worth a thousand pictures." R. Murray Schafer via Bernie Krause


------------------------------------------------------------------------
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/naturerecordists/

<*> Your email settings:
    Digest Email  | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/naturerecordists/join
    (Yahoo! ID required)

<*> To change settings via email:
    
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

------------------------------------------------------------------------