=A0
Thanks. I can use Sony Vega for this sync but would it really be wort=
h the trouble in doing it?
--- In Mitch Hill <> wrote:
>
> At 12:47 AM 7/21/2010 +0000, you wrote:
> >How (or can) I use my Sony PCM-M10 with my Panasonic HDC-HS700 camcorde=
r
> >for better sound quality and if so how? I'd like to be able to walk arou=
nd
> >and record with this configuration.
>
>
> I am not familiar with the Panasonic HS700 cam corder, so what I describe=
> is based on the assumption it works as many other video recorders.
>
> First method, if the HS700 has a line input jack, then you can use the li=
ne
> out on the Sony M10 to feed audio into the HS700 Line input. If the HS70=
0
> only has a microphone input, then a special; cable is needed to swamp the=
> high level output of the M10 Line out down to 1-2 millivolts for the HS70=
0
> microphone preamp. This is not difficult to do if your handy with tools=
> and have a smattering of knowledge of electronics... A simple T network =
of
> resistors does the trick. If you do not swamp or reduce the level of aud=
io
> you most likely will get a lot of noise and distortion...
>
> Second method is not to hook the Sony M10 up to the HS700 but rather to
> record using the M10 separately and then use video sound synchronization=
> and editing software to merge the two recordings. Right now, as I type=
> this, I do not have the name of the company and software available, I'll=
> have to go find it and then I'll edit this reply to include it in a coupl=
e
> of minutes...
>
> --
>
> Thanks,
> Mitch & Shadow...
>
> http://www.4shared.com/dir/UTASxktL/wildlife.html
>
> Shadow's area: http://www.4shared.com/dir/ecfWjyZb/Shadow.html
>
>
>
|