naturerecordists
[Top] [All Lists]

Re: Problem with a Sennheiser MKH30 - "like a growing bubble of stat

Subject: Re: Problem with a Sennheiser MKH30 - "like a growing bubble of stat
From: "Rob Danielson" danielson_audio
Date: Sun May 23, 2010 1:55 am ((PDT))
Hi DL--
Sounds like description of an affect of moisture-- especially if it 
goes away completely at times. Some conditions will provoke this. If 
you're curious at what they were this time, you can check local 
weather resources and see of you can find some charts plotting 
humidity, temp and the dewpoint at that time. For US locations, a 
good resource for this is Mesowest http://mesowest.utah.edu/index.html

There's considerable discussion about this in the List Archives. 
Here's a search of "mic moisture" for example 
http://tinyurl.com/2wfus7m Rob D.


At 9:19 AM +0200 5/23/10, Laloux, Dominique wrote:
>Hello everyone,
>
>Can someone reassure me that this problem can be solved ?
>
>I used one of my 2 Sennheiser MKH30 yesterday in a M/S setup with a 
>MKH60, recording with my Fostex FR-2LE.
>As soon as I pushed the standby button, I started to hear rather 
>loud statics through the headphones.
>
>Turned the recorder off, then on again, and the problem repeated 
>itself. Several times. Turned the phantom power on/off, used a 
>different set of XLR cables... nothing stopped the problem from 
>occuring. I tested both mics alone and the problem occured with the 
>MKH30 only.
>
>The way it happens can be better described as a growing bubble of 
>static : the noise starts very low, then it grows louder and louder 
>for a some time (20-30 seconds or more) and becomes so loud that I 
>need to turn the volume down to near 0.
>At some point, for no obvious reason, it then slowly "shrinks" back 
>and disappears.
>
>I decided to try and record our garden soundscape anyway, and I 
>ended up recording a full 2 hours with the problem repeating 3 times 
>during the 2 hours. The strange thing is that everything was 
>perfectly stable for the 2 hours, with no movement, no change in 
>controls, etc.
>
>What coud that be ? A defective condenser ?
>
>Thanks.
>
>DL


-- 







<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU